Minolta EP5000 Disassembly And Reassembly page 53
Hide thumbs
Also See for EP5000:
- Operator's manual (153 pages) ,
- General, mechanical/electrical (392 pages)
Table of Contents
Advertisement
(10) Cleaning of the AIDC Sensor Board
1156D067AA
(11) Cleaning of the PC Drum Paper Separator Fingers
1136D181AA
(12) Replacement and Cleaning of the Toner Antispill Seal and Cleaning of
the Toner Antispill Plate
1136D182AA
1134D052AA
1136D184AA
1.
Remove the PC Drum Paper Separator Fingers Assy.
2.
Using a brush or a soft cloth dampened with alcohol, clean
the AIDC Sensor Board.
1.
Remove the PC Drum Paper Separator Fingers Assy.
2.
Using a brush or a soft cloth dampened with alcohol, clean
the PC Drum Paper Separator Fingers.
1.
Remove the IU.
2.
Remove two screws, the Toner Antispill Plate, and Toner
Antispill Seal.
3.
Replace the Toner Antispill Seal.
4.
Using a brush, clean the Toner Antispill Seal.
5.
Using a brush, clean the Toner Antispill Plate.
NOTE
When reinstalling the Toner Antispill Plate and Toner Anti-
spill Seal, press them in the direction of the arrows.
D-46
Advertisement
Table of Contents
