Minolta EP5000 Disassembly And Reassembly page 17

1156SBD0203
2-3. PAPER TAKE-UP/TRANSPORT SECTIONS
(1) Removal of the Paper Take-Up Unit
<Except 120V Areas>
1. Remove the Right Door, Right Cover, and Rear Cover.
2. Remove the 1st and 2nd Drawers. (For the removal of the 1st and 2nd Drawers, see p. D-17.)
3. Remove two locking wiring saddles.
4. Unplug one connector from Power Supply Board PWB-C.
5. Disconnect the hookup connector.
<120V Areas>
1. Remove the Right Door, Right Cover, and Rear Cover.
2. Remove the 1st and 2nd Drawers. (For the removal of the 1st and 2nd Drawers, see p. D-18.)
3. Remove one locking wiring saddle.
4. Disconnect the hookup connector.
D-10
1156D005AA
1156D006CA