Minolta EP5000 Disassembly And Reassembly page 61

7. Remove one screw and the Heater Lamp cord in the rear.
8. Remove the Heater Lamp cord from the locking edge cov-
er.
1156D078AA
9. Remove three screws and the rear lamp holder.
10. Remove the Heater Lamp cord from the wiring saddle.
11. Remove the Heater Lamp.
1156D079AA
12. Remove four screws and the Upper Cover.
1156D080AA
13. Remove two screws and the Upper Fusing Paper Separa-
tor Finger mounting bracket.
1156D081AA
NOTE
When reinstalling the Upper Fusing Paper Separator
Finger mounting bracket, be sure that both ends
of the bracket are in tight contact with the frame.
1136D213AA
D-54