Minolta EP5000 Disassembly And Reassembly page 46

5.
1136D155AA
6.
1156D058AA
7.
1156D059AA
Rear
Front
1156D060AA
8.
1136D157AA
Remove three screws and the Main Hopper.
Unplug one connector and remove three screws and the
Sub Hopper.
Remove two screws and the Developer Scattering Pre-
vention Plate.
NOTE
Do not remove the Doctor Blade Assy, as a changed Db
could result.
NOTE
Install the Developer Scattering Prevention Plate so that
its seal is placed behind the side seals of the Developer
Mixing Chamber.
Dump the developer out of the Developing Unit.
D-39