Setup (Dhcp) - Agilent Technologies InfinityLab LC Series User Manual

13 LAN Configuration
Dynamic Host Configuration Protocol (DHCP)

Setup (DHCP)

The DHCP functionality is available on all Agilent HPLC modules with on-board LAN Interface or LAN
Interface Card G1369C, and "B"-firmware (B.06.40 or above) or modules with "D"-firmware. All mod-
ules should use latest firmware from the same set.
1 Note the MAC address of the LAN interface (provided with G1369C LAN
Agilent InfinityLab LC Series RID User Manual
Interface Card or Main Board). This MAC address is on a label on the card or
at the rear of the main board, e.g. 0030d3177321.
On the Local Controller the MAC address can be found under Details in the
LAN section.
Figure 37 LAN Setting on Instant Pilot
189