Blue Screen" Error Status Screen - Siemens SINUMERIK 840D sl Commissioning Manual

8.4

"Blue screen" error status screen

Introduction
If the system crashes, an error status screen ("Blue Screen") showing current system
information is displayed.
The error status screen displays a brief description of the error, which has occurred, plus all
relevant processor registers.
You can transfer the complete system data image to the CompactFlash card (optional) or a
USB FlashDrive.
Displaying system data
In the event of a system crash, the crash address, the register allocation and any additional
information needed for crash analysis are displayed on the screen.
Sorry, but HMI-Embedded has caused an exception in task XXXXX
Function at XXXXXXXX with code XXXXX
The type of exception is : XXXXXXXXXXXXXXXXXXXXX
The exception has occurred at cs : XX eip : XXXXXXXX
EAX= XXXXXXXX EBX= XXXXXXXX ECX= XXXXXXXX EDX= XXXXXXXX
EDI= XXXXXXXX ESI= XXXXXXXX FLAGS= XXXXXXXX DS= XXXX ES= XXXX
SS= XXXX ESP= XXXXXXXX EBP= XXXXXXXX FS= XXXX GS= XXXX
Additional information:
XXXXXXXX loaded at : XXXXXXXX XXXXXXXX loaded at : XXXXXXXX
XXXXXXXX loaded at : XXXXXXXX XXXXXXXX loaded at : XXXXXXXX
XXXXXXXX loaded at : XXXXXXXX XXXXXXXX loaded at : XXXXXXXX
CODE = XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
EIP: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
STACK= XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
Please send the above or saved information to the SINUMERIK
Hotline!
E-mail : ad.support@siemens.com
Fill in subject : "HMI-Embedded exception (SW XX.XX.XX; date)"
Press 'S' to save data or press 'R' to reboot immediately
Press the following keys to:
Press "S"(Save) to save the file on the CompactFlash card.
Press "R" to initiate an NCU restart
Commissioning HMI-Embedded (IM2)
Commissioning Manual, 01/2008, 6FC5397-8CP10-1BA0
Diagnostics/Service
8.4 "Blue screen" error status screen
121