Setting Up The Drive Connection Via Md - Siemens SINUMERIK 840D sl Commissioning Manual

File Types
The file types are set up as needed and are evaluated and displayed by the NCU.
Using the file extension, the system filters which files are visible and which are not. This filter
function can be set as follows:
If the "New" or "Edit" softkeys are selected, a switch is made to the lower half of the window
where a new extension can be entered or an existing extension edited. To exit, press
"Cancel" (without changes) or "Save" (with changes).
2.3.4

Setting up the drive connection via MD

If you do not require more than four drive connections you can set them up via machine
data.
For the authorization of the input for configuration data, the following display machine data
must be set up:
MD9509 $MM_USER_CLASS_DIRECTORY_CHG (weighting 0 ... 7)
Display machine data
The following display machine data is available for authorizing the use of the created drives:
For the "Program" and "Services" areas
MD9510 $MM_USER_CLASS_DIRECTORY1_P
MD9511 $MM_USER_CLASS_DIRECTORY2_P
MD9512 $MM_USER_CLASS_DIRECTORY3_P
MD9513 $MM_USER_CLASS_DIRECTORY4_P
(weighting 0...7)
For the "Machine" area
MD9516 $MM_USER_CLASS_DIRECTORY1_M
MD9516 $MM_USER_CLASS_DIRECTORY2_M
MD9516 $MM_USER_CLASS_DIRECTORY3_M
MD9516 $MM_USER_CLASS_DIRECTORY4_M
The network drives are configured in the display machine data:
MD9676 $MM_DIRECTORY_SOFTKEY_PATH1
MD9676 $MM_DIRECTORY_SOFTKEY_PATH2
MD9676 $MM_DIRECTORY_SOFTKEY_PATH3
MD9676 $MM_DIRECTORY_SOFTKEY_PATH4
The display machine data for the access rights are effective immediately, i.e., after switching
to the relevant application. No restart is necessary.
Commissioning HMI-Embedded (IM2)
Commissioning Manual, 01/2008, 6FC5397-8CP10-1BA0
Configuring the HMI system
2.3 Setting-up network connections
21