Diagnostics/Service
8.4 "Blue screen" error status screen
Save file on CompactFlash card
Press 'L' to save exception data to the local compact flash card.
You can also press 'R' to reboot immediately but we recommend to
first save the data.
Press "L", the following additional status message is displayed:
Please wait - data transmission in progress.
If you have problems you can
press key 'S' to stop transmission
Once all the data have been transferred successfully, the following message appears:
Transmission finished, XXXXXX bytes saved
The exception data was saved in folder /user/sinumerik/hmi
Please send the saved information to the SINUMERIK Hotline!
email : ad.support@siemens.com
Fill in subject : "HMI-Embedded exception (SW XX.XX.XX; date)"
Saving a file on a USB FlashDrive
If you wish to save the error log file on a USB FlashDrive, then copy the "HMI-EM-LX-EX-
*.TRC" file from the CompactFlash card from the folder /user/sinumerik/hmi.
Restarting
If you initiate a restart, the system attempts an automatic restart.
If the NCU does not respond after one minute, perform restart manually by switching the
system off and then on again.
Try rebooting - in the event of no reaction after 1 minute, please
switch off/on
122
Commissioning HMI-Embedded (IM2)
Commissioning Manual, 01/2008, 6FC5397-8CP10-1BA0