Siemens SINUMERIK 840D sl Commissioning Manual page 26

Configuring the HMI system
2.4 Configuring a channel
Example
Table 2-2
; NETNAMES.INI, Version 04, 03.11 30.01.05
[own]
owner=
; Description of possible connections
[conn MMC_1]
conn_1=
; Description of significant net parameters
[param network]
bus=
[param MMC_1]
mmc_address = 1
name=VNC
[param NCU_1]
nck_address = 3
plc_address = 2
name = NCU710
; Description of a standard channel configuration
[chan MMC_1]
ShowChanMenu
DEFAULT_logChanSet =
DEFAULT_logChan =
logChanSetList =
[ChannelArea1]
logChanList
[Channel11]
logNCName
ChanNum
[Channel12]
logNCName
ChanNum
[Channel13]
logNCName
ChanNum
26
Operator panel front as main operator panel
MMC_1
NCU_1
mpi
;only the first letter N or H will be used for evaluation
;NCU -> connection using IP to 710s, ip=must be specified
;HT8 -> connection using SPC2 to PCU with Linux, ip is ignored
;VNC -> or no name, connection to 710s with internal HMI, ip is
ignored
,ip=127.0.0.1
,ip=127.0.0.1
= TRUE
ChannelArea1
Channel11
ChannelArea1
= Channel11,Channel12,Channel13
= NCU_1
= 1
= NCU_1
= 2
= NCU_1
= 3
Commissioning HMI-Embedded (IM2)
Commissioning Manual, 01/2008, 6FC5397-8CP10-1BA0