Siemens SINUMERIK 840D sl Commissioning Manual page 129

Configuration
1. Start the "Viewer" application "mmcR.exe" on the remote PC.
2. If the default for the remote diagnosis port is changed, for example, due to firewall
Figure 8-6
● In the "Option" area, you can specify that a Ping server process is set up on the RCS
● Enter the port numbers in the "Port Configuration" area.
Additional settings
Setting graphic transmission mode
● Set the type of transmission for the screenshots in the "Mode Configuration" area.
Commissioning HMI-Embedded (IM2)
Commissioning Manual, 01/2008, 6FC5397-8CP10-1BA0
8.5 Remote diagnosis "RCS Host Embedded / RCS Viewer Embedded"
settings when the port is activated for incoming packages only, select the "Configuration"
switch in the "RCS Viewer Embedded (Remote Control System)" window (see Figure 4-
6). The following window appears:
Port setting
Viewer, which will wait for the incoming "Pings".
"Graphic Frame" and "Extended Compressed" are the default settings and feature the
highest transmission rate for this remote diagnosis version.
Diagnostics/Service
129