Siemens SINUMERIK 840D sl Commissioning Manual page 82

Creating user-specific alarm texts
4.5 Bitmaps and icons
The user icons have to meet the following requirements:
● Colors: 16-color mode
● Size: OP 010/ OP 010C/ OP 010S: 16 x 16 pixels (height x width)
● File name: 8 characters
● Format: BMP
Procedure
The cross-channel status display is allocated and configured with user symbols in the
HEADER.INI file.
HEADER.INI is located on the CompactFlash card in the following directory:
siemens/sinumerik/hmi/cfg/
1. Copy the HEADER.INI file into the directory oem/sinumerik/hmi/cfg.
2. Use the editor to open the file and assign the user icons to the desired positions.
3. Enter the names of the user icons and the signal for controlling symbol selection in the
HEADER.INI file, section "UserIcons".
[UserIcons]
UI_0= <Ikone_00.bmp>, <position>
...
UI_31= <Ikone_31.bmp>, <position>
USER_ICON_BASE = DBx.DBBy
User icons are addressed bit-by-bit, i.e., if bit n is set in signal DBx DBBy, the user icon with
identifier UI_n is displayed.
If the bit is reset by the PLC, the assigned user icon in the program status display is deleted.
If several user icons are assigned to the same position, the user icon with the highest
identifier number is displayed. Empty positions do not have to be entered.
82
OP 012: 20 x 20 pixels
OP 015: 27 x 26 pixels
UI_0:
Ikone_00.bmp:
Position:
DBx.DBBy:
Name
Name of user icon
Display position (1 to 16)
Signal for controlling icon selection, defined by the user.
Commissioning Manual, 01/2008, 6FC5397-8CP10-1BA0
Commissioning HMI-Embedded (IM2)