Double-click the device to open the web application.
Tip: If setting up multiple Shure devices, use the Identify button in the application to flash the lights on the device.
Step 3: Connect Devices in Dante Controller Software
1.
Download and install Dante Controller Software from http://www.audinate.com
2.
Use Dante Controller to create connections with other Dante devices
Note: Refer to the Dante Controller user guide for more information on channel routing (available at http://www.audinate.com/resources/technicaldocumenta
tion)
Example: Connecting the ANI22 and Shure MXA310
1.
Find the MXA310 in the list of Dante transmitters, and select the plus sign (+) to show all channels.
2.
Find the ANI22 in the list of Dante receivers, and select the plus sign (+) to show all channels.
3.
Check the box where the MXA310 AUTOMIX OUT and the ANI22 DANTE INPUT 1 intersect
Step 4: Configure Audio
1.
Connect analog equipment (such as loudspeakers or wireless microphone systems) to the analog inputs and outputs.
Refer to the hardware section in this guide for information on connections and LED metering.