Event Log - Shure ANI22 Manual

Dante Audio & Controller
Port TCP/UDP
162 udp
[319-320]* udp
2203 udp
4321,
udp
14336-14600
[4440, 4444,
udp
4455]*
5353 udp
[8700-8706,
udp
8800]*
8751 udp
16000-65536 udp
*These ports must be open on the PC or control system to access the device through a firewall.
†
These protocols require multicast. Ensure multicast has been correctly configured for your network.

Event Log

The event log provides a detailed account of activity from the moment the device is powered on. The log collects up to 1,000
activity entries and time-stamps them relative to the last power cycle. The entries are stored in the internal memory, and are
not cleared when the device is power-cycled. The Export feature creates a CSV (comma separated values) document to save
and sort the log data.
Refer to the log file for details when troubleshooting or consulting with Shure Systems Support.
To view the event log:
1. Open the Help menu
2. Select View Event Log
Severity Level
Information
An action or event has been successfully completed
Warning
An action cannot be complete, but overall functionality is stable
Error
A problem has occurred that could inhibit functionality.
Protocol Description
SNMP Used by Dante
†
PTP Dante clocking
Custom Required for packet bridge
Dante Dante audio
Dante Dante audio routing
†
mDNS Used by Dante
Dante Dante Control and Monitoring
Dante Dante Controller
Dante Used by Dante
Shure Incorporated
22/27