Summing - Shure ANI22 Manual

Audio network interface
Hide thumbs Also See for ANI22:
Table of Contents

Advertisement

① Analog Input with Logic
Connection (MX392)
② Analog Input Sources
③ Analog Output Devices
④ Dante-enabled Equip-
ment
⑤ Control CPU
⑥ Network Switch

Summing

The Audio Network Interface provides channel summing to combine input signals and send them over a single output channel.
This makes it possible to send all channels to a device with a limited number of Dante receiver channels or analog inputs. The
relative channel levels are not affected; the mix is summed in the device and sent over a single output channel.
Note: When summing is enabled, a limiter is activated to prevent signal overloading. The limiter does not affect the direct outputs, and will only affect the
summed signal.
By default, the ANI22 treats signals this way:
Analog input 1 → Dante output 1
Analog input 2 → Dante output 2
Dante input 1 → Analog output 1
Dante input 2 → Analog output 2
To combine channels, select one of the summing options in Channels > Inputs.
Summing Option
1 + 2
Analog input 1 + analog input 2
3 + 4
Dante input 1 + Dante input 2
1 + 2 / 3 + 4
Analog input 1 + analog input 2
Dante input 1 + Dante input 2
In addition to running the audio signal, this boundary microphone features three additional
wire leads for logic connections. This allows the switch on the microphone to send a logic
mute signal to other equipment on the network, and to receive a logic LED control signal.
Analog sources, such as wireless microphones, connect to the analog line input
Loudspeakers, amplifiers, or recording devices connect to the analog line output
Dante microphones, such as the Shure Microflex Advance ceiling and table arrays connect
to the network switch and can be routed using Dante Controller software.
A computer connected to the network accesses the web application to control the channel
levels and processing.
The network switch provides Power over Ethernet (PoE) to the ANI22, while also supporting
all other Dante-enabled audio equipment.
Signal Destination
Dante output 1
Dante output 2
Analog output 1
Analog output 2
Dante output 1
Dante output 2
Analog output 1
Shure Incorporated
13/27

Advertisement

Table of Contents
loading

Table of Contents