Hardware and Installation
Hardware
Block Connector Model:
XLR Model:
① Signal/Clip Indicators
Each indicator corresponds to a single channel. Analog and digital gain adjustments are made through the web application.
◦
If an input channel LED turns red, attenuate the level from the source device to prevent clipping at the input stage.
◦
If an output channel LED turns red, lower the corresponding Digital Gain (dB) fader for the Dante channel under the Input
Channels tab. Do not lower the output level (line/aux/mic), as any clipping indicated on the LED occurs before the final out
put level stage.
Shure Incorporated
7/27