Shure ANI22 Manual page 8

LED State
Off
Green
Yellow
Red
② Audio and Logic Connections
Note: Logic connections are only featured on the block connector version.
Block Connector Pin Assignments:
Input
switch
led
gnd
Output
XLR Pin Assignments:
1
2
3
③ Chassis Ground Screw
Provides an optional connection for microphone shield wire to chassis ground.
④ LED Indicators
Power: Power over Ethernet (PoE) present
Note: Use a PoE injector if your network switch does not supply PoE.
Network: Network connection active
Network Audio: Dante audio present on the network
Note: Error details are available in the event log in the web application.
Audio Signal Level
less than -60 dBFS
-59 dBFS to -24 dBFS
-23 dBFS to -1 dBFS
0 dBFS or more
Audio +
Audio -
Audio ground
Logic Mute (sent from microphone)
Logic LED (received by microphone)
Logic ground
Audio +
Audio -
Audio ground
Ground
Positive
Negative
Shure Incorporated
8/27