10.
RJ-45 network port
11.
Reset button
◦
Network reset (press button for 48 seconds): Resets all Shure control and audio network IP settings to factory de
faults
◦
Full factory reset (press button for longer than 8 seconds): Restores all network and Designer settings to the facto
ry defaults
Power Over Ethernet (PoE)
This device requires PoE to operate. It is compatible with both Class 0 and Class 3 PoE sources.
Power over Ethernet is delivered in one of the following ways:
•
A network switch that provides PoE
•
A PoE injector device
What's in the Box
KIT, HARDWARE, ANIUSB-MATRIX
Mounting Bracket (1/3 rack unit)
Note: USB cable not included.
Control Devices with Shure Designer Software
To control this device's settings, use Shure Designer software. Designer enables integrators and system planners to design au
dio coverage for installations using MXA microphones and other Shure networked devices.
To access your device in Designer:
1.
Download and install Designer on a computer connected to the same network as your device.
2.
Open Designer, and check that you're connected to the correct network in File > Designer preferences.
3.
Click Online devices. A list of online devices appears.
4.
To identify devices, select a device and click ID in the Properties menu. Double-click the device to open the settings.
From here, you can add devices to designs or online rooms and route audio to other Shure devices. Learn more at
designer.
You can also access device settings using
Use Designer's Auto Route
Designer's auto route speeds up the process of connecting systems with 1 audio processor and at least 1 microphone. Auto
route also creates mute control routes in rooms with MXA network mute buttons. When you select Auto route, you can direct
Designer to:
•
Create audio routes and mute control routes
•
Adjust audio settings
•
Turn on mute synchronization
•
Enable LED logic control for applicable devices
Shure Web Device
Discovery.
Shure Incorporated
90A33522
53A27742
shure.com/
8/32