Xerox PrimeLink B9100 User Manual page 440

SquareFold ® Trimmer Module
• When booklets exit the SquareFold
from the previously trimmed booklet. Static electricity causes this build-up and it is normal. If
booklets contain trim remnants, remove and discard the remnants.
• The trim feature can be enabled or disabled. When the feature is enabled, you can adjust the trim
setting in 0.1 mm (0.0039 in.) increments, depending on your requirements for the finished
booklet job.
The trim options include the following:
• Trimming On / Off: This option enables or disables the trimming feature. The default setting is
Off.
• Cut to Size: This option decreases or increases the trimmer setting. To decrease or increase the
trimmer setting, use the left and right arrow buttons. Adjustments are made in 0.1 mm (0.0039
in.) increments.
The trim setting is based on the following:
• The number of sheets in the finished booklet
• The width of the finished booklet
• The media type, coated or uncoated
• The media weight
Note:
• To determine the best selections for your job, experiment with various settings. For the best
booklet output, before running larger jobs, run one or more test prints.
• Trim settings cannot be adjusted to remove less than 2 mm (0.078 in.) or more than 20 mm
(0.787 in.) of edge material from the booklet. Adjustments less than 2 mm (0.078 in.) can
produce poor trim quality. Adjustments greater than 20 mm (0.787 in.) result in no
trimming to the booklet edge.
T T r r i i m m G G u u i i d d e e l l i i n n e e s s
The following table shows various scenarios using different paper weights, media types, and trim
setting selections. Use this table as a guideline when selecting a trim setting for your specific job.
Note: The settings shown in the following table are provided as examples and are not meant
to represent every possible job scenario.
Scenario
Paper Size
number
A4: 210 x 298 mm
1
(8.5 x 11 in.)
A4: 210 x 298 mm
2
(8.5 x 11 in.)
A4: 210 x 298 mm
3
(8.5 x 11 in.)
440 Xerox ® PrimeLink
User Guide
® Trimmer device, they can contain trim remnants or scraps
Finished booklet
size
149 x 210 mm (5.5
x 8.5 in.)
149 x 210 mm (5.5
x 8.5 in.)
149 x 210 mm (5.5
x 8.5 in.)
® B9100/B9110/B9125/B9136 Copier/Printer
Approximate
Paper weight
trim setting
130 mm (5.11
75 g/m 2 ; 20
in.)
lbs.
125 mm (.98
90 g/m 2 ; 24
in.)
lbs.
120 g/m ; 32 135 mm (5.31
2
in.)
lbs.
Number
of pages
in a
finished
booklet
20
14
10