Production Ready Finishers
Note:
This procedure is applicable only to the PR Booklet Maker Finisher.
1. Open the finisher front cover.
2. Pull out the Saddle Stitch Unit 3 toward you until it stops.
3. To remove the staple cartridge, hold the tabs on the cartridge, then pull the cartridge out of the
printer.
Note:
There are two booklet staple cartridges provided. The message on the printer control
panel touch screen indicates which cartridge needs replacement.
394
Xerox
®
PrimeLink
User Guide
®
B9100/B9110/B9125/B9136 Copier/Printer