Xerox PrimeLink B9100 User Manual page 173

b. To remove dirt, wipe the document cover with a soft cloth moistened with water. With a soft
cloth, wipe dry the cover. If dirt is difficult to remove, try gently wiping with a soft cloth
moistened with a small amount of neutral detergent.
2. To clean the document glass:
a. To remove dirt, wipe the document glass with a soft cloth moistened with water. With a soft
cloth, wipe dry the glass. If dirt is difficult to remove, try gently wiping with a soft cloth
moistened with a small amount of neutral detergent.
Caution:
glass.
3. Gently, close the document feeder.
C C l l e e a a n n i i n n g g t t h h e e S S c c a a n n n n e e r r
To ensure optimum print quality, clean the document glass regularly. Cleaning helps avoid output
with streaks, smears, and other marks that transfer from the glass while scanning documents.
1. Slightly dampen a soft, lint-free cloth with water.
2. Remove any paper or other media from the output tray.
3. Open the document cover.
To avoid damaging the glass surface, do not press heavily on the document
Xerox ® PrimeLink ® B9100/B9110/B9125/B9136 Copier/Printer
Maintenance
173
User Guide