Siemens SINAMICS S120 Function Manual page 888

Basic information about the drive system
13.14 Licensing
System response for an insufficient license for a function module
An insufficient license for a function module is indicated using the following fault and LED on
the Control Unit:
● F13010 licensing, function module not licensed.
● The drive is stopped with an OFF1 response.
● LED READY Continuous red light.
Note
It is not possible to operate a drive system with an insufficient license for a function module.
The drive requires a sufficient license in order for it to operate.
System response for an insufficient license for an OA application
An insufficient license for an OA application is indicated using the following fault and LED on
the Control Unit:
● F13009 licensing, OA application not licensed.
● The drive is stopped with an OFF1 response.
● LED READY Continuous red light.
It is not possible to operate a drive system with an insufficient license for an OA application.
The drive requires a sufficient license in order for it to operate.
Information on performance expansion
The "Performance" option (order number: 6SL3074-0AA01-0AA0) is required as of the 4th
axis (for SERVO/VECTOR) or as of the 7th V/f axis for the CU320-2 is (see Availability of
SW functions (Page 925)). If the number of axes is exceeded, alarm A13000 is output and
the LED READY on the Control Unit flashes green/red at 0.5 Hz.
When using the extended safety functions, a license is required for each axis.
Creating or displaying license keys via the "WEB License Manager"
The WEB License Manager informs you about how many and which licenses are stored on
the memory card. If you need additional licenses, you can create a new license key using the
WEB License Manager.
Note
A new license is not required for the upgrade. Therefore, do not delete the license key from
the memory card (..\KEYS\SINAMICS\KEYS.txt) if you want to upgrade.
888
Function Manual, (FH1), 04/2014, 6SL3097-4AB00-0BP4
Drive functions