Starting The Web Server - Siemens SINAMICS S120 Function Manual

5. Click "Access".
6. Activate or deactivate the relevant access rights by clicking the corresponding checkbox.
7. Click "Submit" to confirm the settings.
7.28.5

Starting the Web server

Requirements
● The Web server is active in the configuration of STARTER (see Basic configuration
● A functioning drive project
● PG/PC is connected to the Control Unit (target device)
Drive functions
Function Manual, (FH1), 04/2014, 6SL3097-4AB00-0BP4
The "Access rights" dialog box opens with the access settings of the parameter list.
Figure 7-29 Access rights
The preset access rights can be seen for the "SINAMICS" and the "Administrator" users.
The checkbox is selected for the activated access rights.
The dialog box closes.
(Page 391)).
Basic functions
7.28 Web server
399