Siemens SINAMICS S120 Function Manual page 395

6. Click "OK" to confirm the input.
Changing the password
A password can be changed at any time. If a password has already been assigned for a
user, the existing password is shown in encrypted form.
1. Click the "Change password" button in the user setting area.
2. Enter the new password (max. ten characters) in the "New password" field. Pay attention
3. Repeat the input in the "Confirm password" field.
4. Click "OK" to confirm the input.
Password forgotten?
A forgotten password results in that you can no longer access your previously accessible
SINAMICS data and functions via the Web server.
If you are the end user and do not know the default password, please ask your machine
manufacturer (OEM) for your password.
Drive functions
Function Manual, (FH1), 04/2014, 6SL3097-4AB00-0BP4
If both password entries were identical, the input dialog box is closed. If both entries do
not match, the input dialog box remains open and an error message is displayed. At the
same time, the two entries in the input dialog are cleared. In this case, you must enter the
password again in the two input fields.
The "Web Server - Specify Password" dialog box opens.
to upper and lower case.
For security reasons, the password entries displayed in the two input fields are encrypted.
If both password entries were identical, the input dialog box is closed.
Basic functions
7.28 Web server
395