Chassis And Power Supply Compatibility - Avaya Virtual Services Platform 9010 Manual

AC power supply fundamentals
AC OK (green) DC OK (green)
Off On
blinks Off
Off Off
On Off
On Off
On On
On Off
The 9080CP module also provides LEDs for the power supplies. Software on the 9080CP module
automatically determines whether you have installed the 9080CP module in the Virtual Services
Platform 9010 chassis or the Virtual Services Platform 9012 chassis. You do not have to update the
configuration.
The 9080CP module provides six LEDs for power supplies. The Virtual Services Platform 9010
chassis can use a maximum of eight power supplies. On the 9080CP module installed in a Virtual
Services Platform 9010 chassis, the LED for Auxiliary module 1 corresponds to power supply 7, and
the LED for Auxiliary module 2 corresponds to power supply 8.
For more information about the LEDs on the 9080CP module, see Installing Modules in Avaya
Virtual Services Platform 9000, NN46250-301.

Chassis and power supply compatibility

The following table indicates the compatibility between chassis and AC power supply models.
Table 2: Chassis and AC power supply compatibility
Power supply
9006AC
Installing AC Power Supplies in Avaya VSP 9000
12
Service (amber) Fault (red)
Off Off
Off Off
Off Off
Off On
Off On
Off On
Off Off
VSP 9010AC chassis
Supported
Comments? infodev@avaya.com
Condition
No AC for less than 15 ms on
a single unit
AC present but not within
limits
AC not present
Boost stage failure
Over voltage latched
shutdown
Non-catastrophic internal
failure
Standby
VSP 9012 chassis
Supported
December 2014