Avaya Virtual Services Platform 9010 Manual page 16

AC power supply installation for the VSP 9010 AC chassis
Voltage:
Risk of injury from electric shock
Before working on this equipment, be aware of proper safety practices and the hazards involved
with electrical circuits. Use only power cords that have a grounding path. Ensure the switch is
properly grounded before powering on the unit.
Caution:
If you must reinsert a power supply, ensure that the power supply fans stop spinning. When the
fans stop spinning, the power supply is discharged and ready to be reinserted.
About this task
You can only install the power supply one way. The power supplies are blocked to prevent
accidental upsidedown installation. If you meet resistance, you may have the module upsidedown.
Procedure
1. Use two hands to slide the power supply into the slot until the action lever clicks.
2. Rotate the action lever closed to seat the power supply and engage the retaining clip.
Installing AC Power Supplies in Avaya VSP 9000
16
Comments? infodev@avaya.com
December 2014