Avaya Virtual Services Platform 9010 Manual page 24

AC power supply installation for the VSP 9012 chassis
Before you begin
• Remove the logo plate.
Voltage:
Risk of injury from electric shock
Before working on this equipment, be aware of proper safety practices and the hazards involved
with electrical circuits. Use only power cords that have a grounding path. Ensure the switch is
properly grounded before powering on the unit.
Procedure
1. Turn off the power supply switch on the back of the chassis.
2. Disconnect the power cord from the power outlet and from the power supply.
3. Press the retaining clip to release the action lever.
4. Rotate the action lever open to unseat the power supply, moving it slightly forward.
5. Use both hands to pull the power supply from the chassis.
Installing AC Power Supplies in Avaya VSP 9000
24
Comments? infodev@avaya.com
December 2014