Removing The Power Supply - Avaya Virtual Services Platform 9010 Manual

AC power supply installation for the VSP 9010 AC chassis
4. Replace the air inlet cover.
Related Links
AC power supply installation for the VSP 9010 AC chassis

Removing the power supply

Remove a power supply to replace it with a new power supply. After you remove a power supply,
the LED on the power supply turns off, and the chassis automatically redistributes the load to the
remaining power supplies.
Before you begin
• Remove the air inlet cover.
Installing AC Power Supplies in Avaya VSP 9000
18
Comments? infodev@avaya.com
on page 13
December 2014