Avaya Virtual Services Platform 9010 Manual page 22

AC power supply installation for the VSP 9012 chassis
Caution:
If you must reinsert a power supply, ensure that the power supply fans stop spinning.
When the fans stop spinning, the AC power supply is discharged and ready to be
reinserted.
Procedure
1. Loosen the 4 captive screws to remove the logo plate.
2. Push the power supply firmly into the slot until the action lever clicks.
3. Close the action lever on the power supply grill to lock the power supply in place.
4. Replace the logo plate and tighten the 4 captive screws.
5. Connect a power cord from the power inlet to an AC power outlet.
Installing AC Power Supplies in Avaya VSP 9000
22
Comments? infodev@avaya.com
December 2014