Table of Contents
Advertisement
On-Board FastRegen Control Module Programming and Operation Instructions
Vertical Scroll Display Keys (Last, Next)
Clear Display Key
Numeric Keypad
Enter Command Key
Function Keys
On-line Help
P/N 8040406
The last and next keys allow you to display the preceeding or
proceeding messages of the respective Module software. Refer to the
flowcharts in Section 3 - Programming and Operation for more
information on the messages.
The clear key is used to remove user entered information during On-Board
Module programming or device selection.
NOTE: The Clear key must be pressed before the Enter key is pressed to
remove the desired information.
The numeric keypad is used to enter numeric values for On-Board Module
programming and operation.
The enter key is used to accept numeric information which you have
entered via the numeric keypad.
The function keys allow you to select the software function in which
programming or operation is desired. Refer to Section 3 - Programming
and Operation for more information on software functions.
The on-line HELP function provides you with additional information when
used in conjunction with the MONITOR, REGEN, SERVICE,
CONTROL and RELAYS function keys. Ranges of programmable values
are displayed when the HELP key is pressed after the Enter key has been
pressed. ON/OFF values are also displayed at appropriate times.
Instructions are also displayed for certain messages that appear on the
screen. Figure 1-2 shows a help message that might be displayed, line by
line, in the keypad/display when the HELP key is pressed during warm-up
in the regeneration cycle.
-
C
TI
CRYOGENICS
HELIX TECHNOLOGY CORPORATION
1-3
Hide quick links:
Advertisement
Table of Contents
