Setting A Password - Extron electronics DTP2 CrossPoint 82 User Manual

Setting a password

NOTE: The initial factory configured passwords for all accounts on this device have
been set to the device serial number. Passwords are case sensitive. In the event of an
absolute system reset, the passwords are reset to no password.
The web password is administrator level. Passwords are case sensitive.
To assign new administrator and user passwords:
In the Roles and Permissions panel, click
1.
Settings dialog box opens
2. In the Admin panel, click the Change Admin Password link and enter the new
administrator password in the field below (see figure 51,
3.
Click in the Confirm Admin Password field (
Change
Admin Password
Figure 51. Passwords Dialog Box with Administrator Password Entered
If you want to assign a user password, repeat steps 2 and 3 in the User panel (
4.
5. When finished, click
Save
password, click Cancel or the X in the upper-right corner.
To remove an assigned password:
1. In the
Change Admin Password
2. Enter a single space in the appropriate
3. Click .
Save
DTP2 CrossPoint 82 Scaling Presentation Matrix Switchers • Internal Web Pages
. The Role and Permission
Edit
) and repeat the password from the
2
field.
to set the passwords. To close the window without saving a
or
Change User Password
Confirm Password
).
1
).
3
field, enter a single space.
field.
108