Device Menu - Extron electronics DTP2 CrossPoint 82 User Manual

Device Menu

The Device drop-down menu contains options pertaining to device connection,
configuration, and information. For details about all these options, see the
DTP2 CrossPoint 82 PCS Help File.
Figure 46.
Disconnect — Disconnects the PCS program from the connected device and closes
•
the device tab.
NOTE: If a device is already disconnected, the Disconnect option is disabled until
the device is connected.
Settings — Opens a submenu containing the following options:
•
Hardware Settings — Displays the Hardware Settings dialog box containing
•
device information and side tabs that enable you to change the device name,
internal clock, and password of the connected device.
NOTE: The initial factory configured passwords for all accounts on this device
It also contains an Edit Communication Settings button, which provides an
alternative method of accessing the Communication Settings dialog box.
Communication Settings — Opens the Communication Settings dialog box
•
on which you can change IP settings of the connected device.
Reset Device — Opens the Reset Device dialog box, which contains selectable
•
modes for resetting the connected device. In addition, the Communication Settings
dialog box contains the unit information that is also displayed in the Hardware
Settings dialog box.
• Backup — Enables you to export all audio, video, and communication settings of the
connected device to the PC. This exported configuration can be saved as a backup file
(with a .extz extension), or used to replicate settings from one device to other devices
of the same model. When restoring a configuration, you can select specific device
settings.
DTP2 CrossPoint 82 Scaling Presentation Matrix Switchers • Configuration Software
Device Menu
have been set to the device serial number. Passwords are case sensitive.
In the event of an absolute system reset, the passwords are reset to no
password.
102