Programming With The Led Module - Chamberlain Garos CS 300 Operating Instructions Manual

.

Programming with the LED module

. Overview of LED module
. LED module, modes of operation
With the LED module, the controls have two modes of operation:
1. AUTOMATIC
2. ADJUSTMENT
Information:
The current mode of operation of the control is shown via the LEDs.
- In the AUTOMATIC mode, no LEDs flash.
- In the ADJUSTMENT mode, at least one LED flashes.
Pressing the P button toggles between the modes of operation.
Operating mode : AUTOMATIC
In the AUTOMATIC operating mode the door system is operated.
LED displays:
H H Status
The door is open. The programmed OPEN end position has been reached.
The door is closed. The programmed CLOSED end position has been reached.
The door is between end positions. No end position has been reached.
The door has been moved beyond the CLOSED/OPEN end position.
 – CS 300 Gate Controls / Rev. 5.3
Key:
LED off
LED illuminated
LED flashing