Table of Contents
Advertisement
Available languages
Available languages
.
Contents
1.
Contents
2.
Key to symbols
3.
General safety instructions
4.
5.
6.
7.
8.
9.
10.
11.
12.
EU Declaration of Conformity
13.
.
Key to symbols
Danger of personal injury!
The safety instructions must be observed!
Warning! Danger to property!
The safety instructions must be observed!
Information
Special information
OR
Reference to other sources of
information
3.
General safety instructions
2
Guarantee
2
The function and safety of the equipment is only guaranteed
2
if the warning and safety instructions included in these opera-
3
ting instructions are adhered to.
5
Chamberlain GmbH is not liable for any personal injury or
8
damage to property that occurs as a result of the warning and
10
safety instructions being disregarded.
12
14
Using the equipment for its intended purpose
18
19
The CS 300 controls are designed only for controlling gates
19
and doors with digital end position systems.
20
It is only permitted to operate the equipment in dry rooms.
Target group
Only qualified and trained electricians may connect,
programme and service the controls.
Qualified and trained electricians meet the following
requirements:
- knowledge of the general and specific safety and accident
prevention regulations,
- knowledge of the relevant electrical regulations,
- trained in the use and care of appropriate safety equipment,
- capable of recognising the dangers associated with
electricity.
Instructions for installation and connection
- The controls must be disconnected from the electricity sup-
ply before carrying out electrical works. It must be ensured
that the electricity supply remains disconnected during the
works.
- Local protective regulations must be complied with.
- Mains cables and control cables must be laid separately.
Advertisement
Chapters
Table of Contents
