Frus And Compatibility Matrixes; Power Supplies - H3C S6805 Series Hardware Information

3

FRUs and compatibility matrixes

CAUTION:
• Select fan trays and power supplies with airflow directions that meet the ventilation requirements
at the installation site. As a best practice, make sure the power supplies and fan trays have the
same airflow direction.
• Do not install fan trays of different models on the same switch. To guarantee adequate heat
dissipation, install five fan trays of the same model on the switch.
• Do not install power supplies of different models on the same switch. As a best practice, install
two power supplies of the same model on the switch for 1+1 power supply redundancy.
Table3-1 Compatibility matrix between the FRUs and S6805 switches
FRUs

Power supplies

PSR250-12A
PSR250-12A1
PSR450-12A
PSR450-12A1
PSR450-12AHD
PSR450-12D
Fan trays
LSPM1FANSA
LSPM1FANSB
LSPM1FANSA-SN
(support electronic label
information reading)
LSPM1FANSB-SN
(support electronic label
information reading)
Power supplies
CAUTION:
When the switch has two power supplies in 1+1 redundancy, you can replace one of them without
powering off the switch. To avoid device damage and body injury, make sure the power supply to be
replaced is powered off before you replace it.
Part No.
0231A6M0
0231A8FP
0231A6N9
0231A6NC
0231A6NA
0231A6NB
0231A2VT
0231A2VU
0231AG9E
0231AG9F
3-8
S6805-54HF
Yes
Yes
Yes
Yes
Yes
Yes
Yes in Release 6616 and later Release versions. For
the support of ESS and Feature versions, contact H3C
Support.
Yes in Release 6616 and later Release versions. For
the support of ESS and Feature versions, contact H3C
Support.
Yes
Yes
S6805-54HT
No
No
Yes
Yes
Yes
Yes