Komatsu PC1250-11 Original Instructions Manual page 95

OPERATION
When the action level "L01" is displayed
The caution lamp lights up in yellow.
If the caution lamp is lit, the camera image is not displayed on the machine monitor.
Visually check the safety around the machine always when operating the machine.
When you finish the operation, always perform the inspection and maintenance.
Ask your Komatsu distributor for the inspection and maintenance as needed.
CAMERA SYSTEM CAUTION LAMP
When an abnormality occurs in KomVision system controller,
the caution lamp lights up in yellow, and the action level "L01"
is displayed.
If the caution lamp is lit, the camera image is not displayed on
the machine monitor.
Visually check the safety around the machine always when op-
erating the machine.
Ask your Komatsu distributor for the inspection and mainte-
nance.
PILOT DISPLAY AND METER DISPLAY
Pilot display
(1) Engine stop pilot lamp
(2) Lock lever pilot lamp
(3) Aftertreatment devices regeneration pilot lamp
(4) Aftertreatment devices regeneration disable pilot
lamp
(5) Message display
(6) Air conditioner pilot lamp
(7) Wiper pilot lamp
Meter display
EXPLANATION OF COMPONENTS
(8) Swing lock pilot lamp
(9) Preheating pilot lamp
(10) Auto-deceleration pilot lamp
(11) Working mode display
(12) Travel speed display
(13) ECO guidance
3-29