Komatsu PC1250-11 Original Instructions Manual page 149

OPERATION
English, Japanese, French, Spanish, Portuguese, Italian, German, Swedish, Dutch, Danish, Norwegian, Fin-
nish, Icelandic, Czech, Hungarian, Polish, Slovak, Slovene, Romanian, Croatian, Estonian, Latvian, Lithuanian,
Bulgarian, Greek, Turkish, Serbian
1.
Select "Language" (4) on "Monitor Setting" menu screen,
then press the switch F6.
2.
Select the language to use for the display, then press the
switch F6. The screen display changes to the selected lan-
guage.
On "Language" screen, you can perform the following op-
erations with the switches F3 to F6.
F3: Moves to the item below.
F4: Moves to the item above.
F5: Cancels the change and returns to "Monitor Setting"
screen.
F6: Validates the change and returns to "Monitor Setting"
screen.
OPERATOR ID
You can check and change the "Operator ID" which is under identification on the "Operator ID" menu.
The "Operator ID" menu is not displayed when the operator identification function is disabled.
REMARK
Contact your Komatsu distributor for details of the method of setting, changing, or cancelling the operator identi-
fication function.
WHEN OPERATOR IDENTIFICATION FUNCTION IS AVAILABLE WITH SKIP
If an ID is inputted when the starting switch is turned to ON po-
sition, the identified ID is displayed in "Operator ID" column on
"Monitor Setting" menu screen.
EXPLANATION OF COMPONENTS
3-83