Komatsu PC1250-11 Original Instructions Manual page 170

Hydraulic excavator
Table of Contents

Advertisement

EXPLANATION OF COMPONENTS
3.
Grip the right and left handles (A), and pull down the lever
(B) to release the lock.
4.
Grip the handle (C) at the bottom of the front window with
your left hand and the handle (D) at the top with your right
hand, push the window to the front, then lower it slowly.
REMARK
The handles (A) on the right and left top sides of the front
window are not for pulling up and down the window. Do not
pull down the front window with the handles (A).
5.
When the bottom of the window reaches the top of lower
side window, push the top of the window to the front to
push it against right and left lock catches (G) and engage
the lock.
6.
Check that the lever (B) is securely at LOCK position.
The lock is engaged if the arrow on lock case (F)
matches the position of the arrow on lever (B). Check
visually.
The lock is not engaged if the arrow on the lock case
(F) does not match the position of the arrow on the
lever (B). Repeat the operation in step 5 to engage the
lock.
3-104
OPERATION

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pc1250sp-11

Table of Contents