Komatsu PC1250-11 Original Instructions Manual page 14

INTRODUCTION
To assist with job site organisation during use of this machine, a visibility map is provided that shows an approxi-
mation of any masking to visibility between the 1 m rectangular boundary and the 24 m test circle.
Based upon the information supplied in the visibility map the site operator may wish to provide additional meas-
ures where it is felt necessary or provide additional instruction to personnel.
Specification of visibility map
• Working equipment specification : 9.1 m Boom + 3.4 m Arm
• Machine Posture : In accordance with ISO5006
• Evaluation height :1.2 m above the ground
• Scale-interval of the circles is 1 m.
1-12
FOREWORD