Komatsu PC1250-11 Original Instructions Manual page 212

MACHINE OPERATIONS AND CONTROLS
1.
Adjust the mirror with your hand so that the side of the ma-
chine is reflected in the mirror as shown in the figure.
2.
Check that you can see a person at the rear left end of the
machine.
3.
If you cannot adjust, loosen the mounting bolts (1) of the
mirror, and adjust the angles.
If the mirror is adjusted by loosening the mounting bolts, be sure to adjust the mirror to its regular position. For
the adjustment method, see "PROCEDURE FOR ADJUSTING REGULAR POSITION OF MACHINE LEFT
FRONT MIRROR (A)".
PROCEDURE FOR ADJUSTING REGULAR POSITION OF MACHINE LEFT
FRONT MIRROR (A)
The following conditions must be met before starting the work to prevent the machine from moving dur-
ing the work.
• The machine is placed on a level ground.
• The work equipment is lowered to the ground in secure posture.
• The lock lever is in LOCK position.
• The engine is stopped.
When returning the mirror to its regular position, perform the following adjustment.
3-146
k k
CAUTION
OPERATION