Komatsu PC1250-11 Original Instructions Manual page 219

OPERATION
METHOD FOR OPERATIONS AND CHECKS BEFORE STARTING ENGINE
k k
When starting the engine, check that the lock lever is se-
curely at LOCK position.
Perform the check before starting the engine according to the
following procedure.
1.
Check that the battery disconnect switch (S) is in ON posi-
tion (I).
2.
Check that the lock lever (1) is at LOCK position (L).
3.
Check that all the control levers and control pedals are at
NEUTRAL position.
If all the control levers and control pedals are released,
they return to NEUTRAL position.
4.
Insert the key into starting switch (2) and turn it to ON posi-
tion (B).
5.
On the input display screen displayed on the monitor, input
the password and push input confirmation switch F6.
If a password is set, the input display screen will be indi-
cated on the monitor screen.
REMARK
For the setting, changing, or canceling the password, ask
your Komatsu distributor.
WARNING
MACHINE OPERATIONS AND CONTROLS
3-153