S6520X-54Xc-Upwr-Si - H3C S6520X-SI Series Installation Manual

in the expansion slot. For more information about installing and removing an expansion card, see
"Installing and removing an expansion

S6520X-54XC-UPWR-SI

Figure 68 Front panel
(1) 10G/5G/2.5G/1000/100BASE-T autosensing Ethernet port
(2) 10G/5G/2.5G/1000/100BASE-T autosensing Ethernet port LED
(3) QSFP+ port LED
(5) Mode button
(7) Expansion card status LED (SLOT)
(9) Micro USB console port
(11) Management Ethernet port LED (LINK/ACT)
(13) QSFP+ port
Figure 69 Rear panel
(1) Grounding screw
(3) Expansion card
(5) Fan tray 3 (FAN3)
(7) Power module 2 (PWR2)
The ESN serial number and MAC address of the S6520X-54XC-UPWR-SI switch can be found on
the serial label pull tab.
An S6520X-54XC-UPWR-SI switch comes with power module slot 1 empty and power module slot 2
installed with a filler panel. You can install one or two power modules for the switch as required.
In Figure 69, two PSR720-56A AC power modules are installed in the power module slots. For more
card."
1 2
(4) Console port (CONSOLE)
(6) System status LED (SYS)
(8) Mode LED (MODE)
(10) USB port
(12) Management Ethernet port
(2) Fan tray 1 (FAN1)
(4) Fan tray 2 (FAN2)
(6) Power module 1 (PWR1)
(8) Serial label pull tab
54
6
7
8
3 4 5
9
13 12 11 10