Accessing The Switch For The First Time; Setting Up The Configuration Environment; Connecting The Serial Console Cable - H3C S6520X-SI Series Installation Manual

Accessing the switch for the first time

Setting up the configuration environment

You can access and configure the switch through the serial console port or the micro USB console
port. Only the micro USB console port is available if you connect both the serial console port and
micro USB console port.
As a best practice, use the serial console port to access the switch. The switch is not provided with a
serial console cable or a micro USB console cable. Prepare these cables yourself or purchase them
from H3C.
Figure 39 Connecting the serial console port to a PC

Connecting the serial console cable

CAUTION:
Follow these guidelines when you connect a serial console cable:
• Identify the mark on the serial console port and make sure you are connecting to the correct port.
• The serial ports on PCs do not support hot swapping. To connect a PC to an operating switch,
first connect the PC end. To disconnect a PC from an operating switch, first disconnect the switch
end.
A serial console cable is an 8-core shielded cable, with a crimped RJ-45 connector at one end for
connecting to the serial console port of the switch, and a DB-9 female connector at the other end for
connecting to the serial port on the console terminal.
29