S6520X-26C-Si - H3C S6520X-SI Series Installation Manual

S6520X-26C-SI

Figure 60 Front panel
(1) SFP+ port
(3) Power module 1 status LED (PWR1)
(5) Management Ethernet port LED (LINK/ACT)
(7) Console port (CONSOLE)
(9) Mode button
(11) Mode LED (MODE)
(13) Power module 2 status LED (PWR2)
Figure 61 Rear panel
1
(1) Grounding screw
(3) Power module 1 (PWR1)
An S6520X-26C-SI switch comes with power module slot 1 empty and power module slot 2 installed
with a filler panel. You can install one or two power modules for the switch as required. In
two PSR75-12A AC power modules are installed in the power module slots. For more information
about installing and removing a power module, see
An S6520X-26C-SI switch comes with a filler panel in the expansion slot. You can select an
expansion card for the switch as required. In
in the expansion slot. For more information about installing and removing an expansion card, see
"Installing and removing an expansion
1 2
2
card."
3 5 6 7 8
4
12
13 11
(2) SFP+ port LED
(4) System status LED (SYS)
(6) Management Ethernet port
(8) Micro USB console port
(10) USB port
(12) Expansion card status LED (SLOT)
3
(2) Expansion card
(4) Power module 2 (PWR2)
"Installing and removing a power
Figure 61, an LSWM2SP2PM interface card is installed
50
9 10
4
Figure
module."
61,