Control Panel (Cp); Led; External Indicator (Led); Display / Lcd - Panasonic EBL128 Planning Instructions

Panasonic Eco Solutions Nordic AB
MEW01622 Rev: -
2.10
2.11
2.12
2.13
2.14
2.15
2.16
2.17
2.18
In the ext. FBP a printer can be included.

Control panel (CP)

The Control Panel is a part of the EBL128 front, intended for the
building occupier, service personnel, etc. to "communicate" with
EBL128 / the system.

LED

LED (Light Emitting Diode) = Yellow, green or red optical indicator
("lamp").

External Indicator (LED)

A unit with an LED. Connected to an ASB, CDB or a detector with a
built-in LED, for external indication. Lit when the built-in LED is lit.

Display / LCD

LCD (Liquid Crystal Display) = Display for presentation of fire
alarms, fault messages, etc. Normally alphanumeric characters and
backlight.

Door open / Key switch

A door / key switch, which has to be activated in order to get access to
the push buttons on the front. Indicated by the LED "Door open".

Site Specific Data (SSD)

This data is unique for each installation.
presentation numbers, alarm texts, programmable outputs, etc. are
programmed (configured) in the PC program EBLWin and has to be
downloaded in EBL128.
Software (S/W) / Firmware / System
program
The S/W makes EBL128 (the microprocessor) work. It is factory
downloaded but a new version can via the PC program EBLWin be
downloaded in EBL128 on site.

EBLWin

PC program used to create and download the SSD in EBL128 unit.
Also used to download another / new software version.
Can be used during commissioning / maintenance of the EBL128
system (autogenerate COM loop SSD, acknowledge faults, etc.).

Web-server

The Web-server is used to get EBL128 information as well as remote
control via a PC (browser) and an intranet / internet. The Web-server
is configured via the PC tool EBLWin.
EBL128 Planning Instructions V2.0.x
12
All alarm points,