Event Log; Loss Of Main Power Source; Fault: Loss Of Main Power Source; Lcd Backlight - Panasonic EBL128 Planning Instructions

Panasonic Eco Solutions Nordic AB
MEW01622 Rev: -
13.26
13.27
13.27.1
13.27.2
13.28
normally closed contact.
channel (N) is ON.
NOTE! Only one input per time channel can be used.

Event log

The event log is divided into three types, i.e. Alarm, Interlocking and
General.
500 events will be stored in each type of log. The logs are circular.
The event logs can be shown via menu H4/U6 (the latest event is
shown "on top") or shown / printed via EBLWin or the Web-server.
Date & Time are stored together with every event.

Loss of main power source

Regarding the Main power source and Second power source, see
chapter "Power supply", page 167.

Fault: Loss of main power source

This fault can be delayed since the c.i.e. is powered via the backup
battery in case of mains failure, and mains failures are normally very
short.
The delay time for the fault "Loss of main power source" can be set
via EBLWin to 0-300 minutes (default is 30 minutes).
(A delay time >30 minutes is a violation to the EN54-2 standard.)

LCD backlight

In order to reduce the current consumption the LCD backlight will
never be turned on during loss of the main power source.
Exceptions
 Australian convention: The LCD backlight will be turned on
also during loss of the main power source.
 New Zealand convention: The LCD backlight will be turned on
also during loss of the main power source.

Evacuate

When the green key "Evacuate" (P5)
programmed for sounders (i.e. type "Alarm devices"), will be
collective turned ON (steady). This is indicated in the LCD:
119
Normally low or a normally high for an optocoupler input.
120
The green key "Evacuate" (P5) on the c.i.e. front is only valid for the
Belgian, British Standard, Hungarian, Spanish and Ukrainian conventions. In
other conventions this key might be yellow or dark grey and have another or
no function.
121
Alt. when a programmable input is activated. One input only.
116
EBL128 Planning Instructions V2.0.x
119
When the input is "activated" the time
120
is pressed
121
, all outputs