Calt45 Installation - Standard Communications TVM Series Owner's Manual

Option Installation
VISUAL IF IN
AURAL IF IN
Figure 5-13. IF Combiner PC Board Component Locations
5. Reinstall the IF combiner PC board :
a. Connect one end of the supplied seven-inch TMP-to-TMP coaxial cable
to location J303 on the IF combiner board.
b. Reinstall the IF combiner board in the unit rear panel.
c. Connect the other end of the coaxial cable to JN01 on the CALT45
board.
Page 5-14
Figure 5-12. CALT45 Installation
J302
R302
J301
Owner's Manual
J303
MEASURE
RESISTANCE
TVM450/S/TVM550/S/TVM550II/TVM550IIS
7076
7079