8.
Install the F-to-RCA connector from the package in the upper hole, with the
F connector facing outward.
9.
Disconnect the RCA-to-RCA cable from J201 to the IF combiner board at the
combiner board.
10. Connect the RCA–RCA cable from connector J101 on the up/down con-
verter to the top F connector as shown. (Use the supplied RG-59 A/U cable
to jumper the new IF connectors when this option is not being used.)
11. Reinstall the modulator top cover.
12. Reconnect all cables removed in step 1.
CSG60 OR CMA60
BOARD
Figure 5-10. CIF450-1 Installation
TVM450/S/TVM550/S/TVM550II/TVM550IIS
OUTPUT AMP
(UP/DOWN CONVERTER
MODULE
RCA-TO -RCA
NEW
CONNECTORS
F-TO-TMP
CABLE
(MODIFIED)
Owner's Manual
RF TUNER/MIXER
MODULE)
EXISTING
J101
CABLE
IF COMBINER
BOARD
EXISTING
JACKS
Option Installation
POWER SUPPLY
BOARD
(P800)
9020
Page 5-11