Standard Communications TVM Series Owner's Manual page 5

Frequency-agile
Table of Contents

Advertisement

13. NOTE TO CATV SYSTEM INSTALLERS: This reminder is provided to call your
attention to NEC Articles 810-21, 820-22, and 820-40 that provide guidelines
for proper grounding. In particular, these articles specify that the cable ground
shall be connected to the building grounding system, as close to the point of
cable entry as practical (see Figure 1).
TO SATELLITE
RECEIVER
CONNECT TO THE NEAREST
ACCESSIBLE LOCATION ON THE
STRUCTURE SYSTEM
NOTES:
1. USE #10 AWG (5.3 MM
AWG (8.4 MM
AWG (1.0 MM
OR BRONZE WIRE, OR LARGER, AS
THE GROUND WIRE.
Figure 1. Typical Antenna Grounding
Page iv
ANTENNA DISCHARGE
UNIT
(SEE NOTE 2)
FEED LINE
GROUND CONNECTIONS
(SEE NOTE 1)
2
) COPPER, #8
) ALUMINUM, OR #17
2
) COPPER-CLAD STEEL
2
Owner's Manual
GROUNDING ELECTRODE
8 FEET
IN COMPLIANCE WITH
NEC 810-21/NEC 820-22/
NEC 820-40
2. MOUNT THE ANTENNA DISCHARGE UNIT
AS CLOSE AS POSSIBLE TO WHERE THE
FEED LINE ENTERS THE BUILDING.
TVM450/S/TVM550/S/TVM550II/TVM550IIS
GROUND CLAMP
9001

Advertisement

Table of Contents
loading

Related Products for Standard Communications TVM Series

This manual is also suitable for:

Tvm 450Tvm 550Tvm 450 sTvm 550 iiTvm 550 sTvm 550 ii s

Table of Contents