Standard Communications TVM Series Owner's Manual page 4

Frequency-agile
Table of Contents

Advertisement

Standard Communications Corp. (SCC) strongly advises the user to read and
understand the following safety instructions prior to installing and operating this
equipment.
1. Read These Instructions First − All safety and operating instructions should
be read before installing or operating this equipment.
2. Retain This Instruction Manual − Safety and operating instructions should
be retained for future reference.
3. Heed Warnings − All warnings on the equipment and in this Owner's Manual
should be adhered to.
4. Cleaning − Unplug the equipment from the AC power outlet before cleaning.
Do not use liquid or aerosol cleaners.
5. Water and Moisture − Do not operate the equipment in high-humidity areas.
6. Ventilation − Do not block or cover slots and openings in this equipment.
These are provided for ventilation and protection from overheating.
7. Power Sources − Operate this equipment only from the type of power source
indicated on the rear panel.
8. Grounding or Polarization − This equipment may be equipped with a
polarized AC line plug (a plug having one blade wider than the other). This
plug will fit into the power outlet only one way. This is a safety feature. If you
are unable to insert the plug into the outlet, try reversing the plug. If the plug
still does not fit, contact your electrician to replace your obsolete outlet. Do
not defeat the safety purpose of a polarized plug.
9. Servicing − Refer all servicing to qualified SCC personnel. Opening or removing
covers may expose dangerous voltages.
10. Replacement Parts − When replacement parts are required, make sure the
service technician uses only replacement parts recommended by SCC. Un-
authorized substitutions may result in fire, electric shock, or improper opera-
tion of the unit.
11. Safety Check − Upon completion of any service or repair to the equipment,
ask the service technician to perform safety checks to determine that the
equipment is in proper operating condition.
12. Lightning − For added protection during a lightning storm or when the
equipment is left unattended or unused for long periods, unplug it from the
power outlet and disconnect the cables between the equipment and the an-
tenna subsystem. These precautions will prevent damage to the equipment
that could be caused by lightning strikes or power line surges.
TVM450/S/TVM550/S/TVM550II/TVM550IIS
IMPORTANT SAFEGUARDS
Owner's Manual
Page iii

Advertisement

Table of Contents
loading

Related Products for Standard Communications TVM Series

This manual is also suitable for:

Tvm 450Tvm 550Tvm 450 sTvm 550 iiTvm 550 sTvm 550 ii s

Table of Contents