Cbp45-1 Installation - Standard Communications TVM Series Owner's Manual

14. Connect the other end of the cable to the IF Combiner PC board.
15. Remove the two screws anchoring the rear-facing half of the up/down con-
verter to the chassis.
16. Align the CBP45 PC board mounting bracket holes with the up/down converter
board bracket holes and reinstall the screws removed in step 15.
17. Reinstall the modulator top cover.
18. Affix the COMP IF label to the unit rear panel, as shown in Figure 5-4.
19. Reconnect all cables removed in step 1.
TVM450/S/TVM550/S/TVM550II/TVM550IIS
Figure 5-6. CBP45-1 Installation
Owner's Manual
Option Installation
9396
Page 5-5